An ultra capable sports flyer in a micro package! The Durafly F3A Micro 420mm comes 98% pre-assembled right out of the box and can be ready to fly in just minutes. The lightweight construction of this model, coupled with a proven airframe design gives this model a locked in feel while performing aerobatics, long smooth knife edge flight is a breeze. Many models of this size are often limited by linear servos or cheap components, but not the Durafly F3A! Featuring pre-installed, fully proportional HK-5320 Digital servos, a Turnigy ESC and an NTM-2400kv brushless motor. The build quality is just fantastic. Fully hinged ailerons are another example of why this airplane stands out from the crowd. This is a fast model to put together, the motor and ESC are pre-installed leaving you to simply install the wing, connect your receiver and then go fly! Performance is of course what this model is all about and the Durafly F3A is no slouch! Power is delivered courtesy of the all new powerful NTM Brushless motor running on 3s, for reliability a Turnigy ESC is pre-fitted and the servo/ESC connectors are all compatible with the 4 Channel Orange Micro RX (R415). This model might be cheap to put in the air, but make no mistake, this is one seriously capable aerobatic model, just make sure you take a handful of Lipoly batteries with you when you go and fly, pattern flying the Durafly F3A Micro around your local park is addictive! Specs: Includes: Requires: |